15% off

      Clamp Meter on Earth Tester FT6380-50

      83,158 97,000 15% off

      Buy Clamp Meter on Earth Tester FT6380-50 Online

      NET AMOUNT Rs.70,473.00 + 18% GST APPLICABLE


      Brand
      		Hioki 
      Model 
      FT6380-50
      Measurement principle
      		Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
      Earthing resistance range
      		0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, Accuracy: ±1.5 % rdg. ±0.02 Ω
      AC Current range
      		20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
      Maximum input current (Current measurement)
      		100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50 Hz/60 Hz, requires derating at frequency)
      Maximum rated terminal-to-ground voltage
      		600 VAC measurement category IV (anticipated transient overvoltage 8000 V)
      Memory function
      		2000 data
      Alarm function
      		For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold.
      Warranty
      		1 Year

      Clamp Meter on Earth Tester FT6380-50 Specifications PDF  Download 


      22 In Stock
      Inquiry  
      Add To Wishlist Compare
      Deliver to
      Check

      Buy Clamp Meter on Earth Tester FT6380-50 Online


      Multiple grounding can be easily checked with the clamps.

      Measure multi-grounded systems


      Clamp on the earth cable. The instrument has two cores for voltage injection and current measurement. 1. The voltage transducer injects a defined voltage into the multi-grounded system. 2. From the defined voltage and measured current, the total circuit loop resistance is calculated in the following equation. Rx + 1/ [ (1/R1) + (1/R2) + (1/R3) + (1/R4) + ... ] = V/I In a typical multi-grounded system, the parallel resistance value is small enough to be ignored and the equation as referred on the left can be simulated as follows. Rx = V/I


      Buy Clamp Meter on Earth Tester FT6380-50 Online Near me
      Buy Clamp Meter on Earth Tester FT6380-50 online in India at wholesale rates. If you have been looking for Clamp Meter on Earth Tester FT6380-50 online in India at wholesale rates. If you Clamp Meter on Earth Tester FT6380-50 online in India at wholesale rates. If you have been looking for AC CLAMP METER Clamp Meter on Earth Tester FT6380-50 dealers, your search ends here as you can get the best Clamp Meter on Earth Tester FT6380-50 distributors in top cities such as Delhi NCR, Mumbai, Indore, Goa, Karnataka, Bangalore, Bhiwandi, Navi Mumbai, Nashik,   Chandigarh, Lucknow, Assam, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad.

      Weight 2.1 kg
      Dimensions 122 × 145 × 321 cm

      You may also like…

      View All
      View All