Kusam Meco KM2008 - Leakage Current Clampmeter With Data Logging Function & PC Interface

Test Mode : Clip-on CT, Integral mode.

Display Mode : Four Digit LCD display.

LCD Dimension : 35mm x 21.5mm

Sampling Rate : About 2 times/sec

Range : 0.00mA ~300.0A

Frequency : 50 / 60Hz; Automatically

Resolution : 10mA

Line voltage : Line test under AC600V

Data Hold : Display shows "DH" symbol.

Out of Range : Display shows "OL" symbol.

Data Storage : 99 groups, all used when display "FULL"

Power Consumption : about 5mW

Peak Hold : Push "HOLD" without release, the meter will show the peak value during the pushing period.

Battery Voltage : "-/+ " indicating the battery voltage is lower then 7.2V. Then the battery have to be changed.

Operating Temperature and Humidity : 0°C ~ 40°C : below 80% R.H.

Storage Temperature and Humidity : -10°C ~ 60°C : below 70% R.H.

Insulation Strength : AC 2kV/rms (between the alloy of the clamp & housing)

Auto Power Off : 5 minutes after power on, it will power off automatically to lower the power consumption.

RS 232 Interface : Data store in the memory of the meter via RS232 upload to PC, or on-line monitoring.

Power : Standard 9V battery.

Dimension : 175(W) x 70(H) x 38(T)mm

Weight : Approx. 120g (with battery)

Display Size : 32mm x 15mm

Safety: IEC1010-1, IEC1010-2-032, pollution degree 2, CAT III (600V)

clamping grounding line, single-phase line together). High Accuracy leakage clampmeter, model KM 2008, is specially designed for measurement of AC leakage current; It is a product with relatively small size, high accuracy and perfect function compared with similar instrument in the world.Buy from Vegabazaar with fast shipping. Do calibration any of instruments at Vega Calibrations and Validations Services LLP